DG70-Export 工业吸尘器
industrial vacuum cleaner for dust,liquid and solid material
|
机器型号Model: DG70 Export |
|
电压 Tension |
伏 volts/HZ |
380 |
|
电机 Motor of type |
类型 type |
涡轮电机side channel blower |
|
功率 POWER |
千瓦 kw/hp |
5.5kw/7.5hp |
|
真空度 Max.Vacuum Rate |
毫米水柱 mm.H2o |
3000 |
|
排风量 Max.Air flow Rate |
立方米/小时 m3/h |
600 |
|
过滤网面积 Filter surface |
平方厘米 cm2 |
30000 |
|
过滤网的类型 Type of filter |
类别 type |
星型过滤网，G 类pocket |
|
过滤网过滤 Filter efficiency |
微米 CAT BIA Micron |
L/G>3 |
|
过滤网上透风量 Air load on filter |
M3/M2/h |
200 |
|
过滤网震尘器 Filter shaker |
方式 type of filter shaker |
手动震尘manual filter shaker |
|
集尘箱容积 Capacity |
公升 LT. |
100 |
|
吸尘口直径 Suction inlet |
毫米 mm |
80 |
|
噪音 Noise level |
分贝 dB(A) |
74 |
|
保护级别 Protection |
IP |
55 |
|
绝缘级别 Isolation |
CL |
F |
|
包装尺寸(长宽高）Dimensions |
厘米 cm |
62-110-150 |
|
重量 Weight |
公斤 kg |
100 |
干湿两用配套件 wet & dry kit：
吸尘系统 Suction unit
吸尘系统是德国Rietschle 提供的旁路马达，是由风扇和马达轴直联而成，没有传输装置。机器的维修非常方便，可以24 小时高强度作业，操作时噪音低，性能优。当机器过热时会自动切断电源，停止工作。控制板设在机器的旁边，有两个独立的ON 和OFF 开关（IP65），一个紧急关闭开关和软开启按钮。一个绝缘过滤网设在马达和主过滤网中间，如果灰尘没有被主过滤网过滤掉，仍可以防止灰尘与马达接触。真空指示器会不停地监视吸尘过程，避免堵塞或异常。
The suction is provided by a suction unit of the shide channel blowe type, with direct couplong between the fn and the motor shaft and no transmission system. It is thus completely maintenance free,fit for round-the-clock 24hours duty, very silent and provides outstanding suction performances; a safety thermic switch cuts off the motor in case of overheating. The control board is placed in a safe positin at thd back, and include two independent ON and OFF switches(protection IP65); a vacuum indicator enables constant checking of the suction performance, and detectiong poffible clogging of thd filter.
过滤系统 Filter unit
由聚酯制成的过滤网安装和保护在钢铁过滤桶里，以口袋形状裁剪，从而增加了过滤网的表面（30000 cm2）并且具有高过滤功效（3 微米）。手动震尘器使用户上下摇动来清洁过滤网，让大部分灰尘掉落保持过滤网干净，这样能够延长它的使用寿命和确保吸尘功效。前部铝质以印模压铸的吸尘接口（直径80 毫米）放置在过滤网下面，因此不用取出或更换过滤网就可以同时灰尘和固体、液体等物质（后者只能在集尘箱容积的范围之内）。过滤筒内一个气旋焊接的传输带直接传送大部分的灰尘，并能保护过滤网不被割破或撕开。
The filter is placed and protected inside the steel filter chamber; the filter is made of polyester tailored with pockets in order to increase the filter surface(30,000cm2), and has a high filtration efficiency(3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The aluminium die-cast suction inlet(Φ80㎜.diameter), placed below the filter, makes it pssible to vacuum at the same time dust, solid and liquid material(the latter only wityin the capacity of the container), with no need to change or take out the filter.
集尘系统 Collection unit
被吸的物质都落在带轮子的集尘箱里（100 升），从而可以方便安全处理被吸的物质。如果需要，可以直接收集到垃圾袋里。
整个机器安放在坚固钢铁底盘上，带两个旋转轮子，其中一个有制动装置，所有金属部件都是环氧喷漆的。
The vacuumed material is placed inside a drop-down bin mounted on wheels(100 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be clooecting it directly into a plastic bag.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted.